Cryogenic Liquid Storage Tanks Exported to Indonesia

cryogenic liquid storage tank were shipped to Surabaya, East Java, Indonesia, on July 12, 2026, under TAIDA GLOBAL’s coordination for a local industrial gas storage project.

The project included vertical and horizontal storage tank configurations, selected according to the customer’s storage media, operating pressure, installation layout, and transportation requirements.

Before shipment, the tank bodies, piping systems, valves, safety devices, vacuum insulation performance, surface finish, and transport supports were inspected. The equipment was then secured and prepared for sea transportation to Indonesia.

The main specifications are as follows:

Cryogenic liquid storage tank:

1. Tank capacity: 5–250 m³

2. Configuration: Vertical / horizontal

3. Applicable media: LNG, LO₂, LN₂, LAr, LCO₂

4. Working pressure: 0.8–2.1 MPa

5. Minimum design metal temperature: -196°C / -40°C

6. Insulation type: Vacuum powder insulation / high-vacuum multilayer insulation

7. Main materials: S30408 / 16MnDR / Q345R

8. Non-destructive testing ratio: 100%

9. 
   

10. Strength after strain strengthening: ≥737 MPa

11. Fatigue resistance: ≥50,000 cycles

12. Vacuum interlayer leakage rate: ≤1 × 10⁻⁸ Pa·m³/s

13. Sealed vacuum level: ≤0.1 Pa

14. Vacuum interlayer service life: ≥5 years

TAIDA GLOBAL supports technical selection, specification confirmation, production coordination, quality inspection, export packaging, loading, and delivery to Indonesia.

Same Quality Standard. Lower Total Procurement Cost